Find out about our news !!

SiGn up to our newsletter >

FAQ
RECOMMENDATIONS -Check that your work area is free of dusk. -Before working, disinfect your client’s hands and yours with your profantastik cleaner. -Advisable to always leave a base, only for hands and another for feed. When applying powders, use a “top” only for powder. -Always enamel thin layers and seal edges. -Before use de lamp, connect it to a regulator for greater durability. -Drying time in 30 sec for layer in led or uv / led lamps of 36 watts or more. Drying time of 2 min per layer for uv lamps of 36 watts. If your lamp has more voltage you can dry in less time. If your lamp has less voltage, please adjust the drying time to your lamp. NAIL PREPARATION When should I stop polishing the nail? 1. Rub gently with 180 grain sonpy lime to leave the porous nail, that is leave the nail without shine. BASE Why does not the base last? 1. Inadequate preparation. Check that the nail is well polished, do not leave it with shine or grease. 2. The less amount of base you occupy, the adhesion will be better. Remove the excess from the brush when glazing. We recommend starting with the tips and then with the rest of the nail. Check the videos section to apply the base. 3. Check that your lamp dries correctly. 4. Do not forget to seal the edges. Is it necessary to brush the base? It is not necessary, but it is ideal, because this way you verify that the base is dry and thin. Besides, it activates a better adhesion with the color. Why are there 2 bases? Differences between “base” and “rubber base” 1. Both are very good bases. The difference is that the normal base requires ph leveling and in warm areas, or when the client exposes the natural nail to the water, pools, use “punta secure”. It is a more liquid base and it is used on acrylic or natural nail. 2. The “rubber base” does not require nail prepares. It is applied on the porous and clean nail. It is less fluid and is ideal for clients who has thin fingernail or difficult ph. 3. The base is always applied in thin layers because it has more adhesion and it looks more natural, also the removal is faster. TOP Why does not the “top” shine? 1. Check the heat of the lamp and the drying time. 2. Apply thin layers. 3. Wait a few seconds when leaving the lamp so that the nail does not become opaque. Why does the “top” has granules? 1. Check that your work area is always clean to not contaminate the colors when you polish the nail. Close the enamels after finishing work. What does “top no wipe” mean? 1. “Top no wipe” is a top that when drying does not make an inhibition layer, is high brightness and it is used for any gel o acrylic application. MATTE Why is the “matte” not uniform? 1. Apply the “matte” with the “flotada” brush in sufficient quantity on the color gel without grease or powder. 2. Check your drying times. “Matte” gives velvet effect and need heat. If it is led/uv with high power, in 30 sec, but if it is not, with 60 sec. Conversely if the lamp is only led, dry 3 times for 30 sec. COLOR Why does the color shrink? 1. Enamel with a thin layer and dry it correctly. NATURAL BUILDER How can I protect the decals for durability? 1. Apply 2 thin layers, drying in 30 sec. The natural is very good nail hardener. You can apply 2 thin layers above the base before the color on applications of natural nail. 4D What should I do to make the powder application last longer? 1. Apply a 4D layer above the “top no wipe” and seal the tips well. If it is necessary, flip the hand, seal and dry it. Apply “top no wipe” again. You can also use “natural builder” to seal. POWDERS Why does not the powder shine? 1. Always apply the “top no wipe” above the powders. 2. Dry it correctly with an adequate lamp and enough time. 3. Dry finger by finger to give it more shine and so that the powder does not soak. 4. Rub the powder when leaving the lamp because the nail is still hot. 5. Check that your powder applicator is dry, clean and not contaminated. 6. Rub without scraping, gently. You can use a rubber applicator. why does not the application of powder last? 1. The powders are applied in acrylic nails because they do not have flexibility. 2. The powders must be encapsulated with natural (2 layers) or 4D (1 layer), seal the edges well and then apply “top” above. Dry well because they are many layers.

1

2

Sign up and receive our NEWSLETTER

Find out about our news !!

SigN up to our newsletter >

INFORMATION FAQ Contact
SOCIAL NETWORKS
CUSTOMER SERVICE PHONES Telephone number: +52 1 (271) 712 33 66 Cellphone number: +52 1 271 111 5829 (WhatsApp)

All rights reserved 2020

Web design: www.aceza.com.mx

Privacy notice

FAQ
RECOMMENDATIONS -Check that your work area is free of dusk. -Before working, disinfect your client’s hands and yours with your profantastik cleaner. -Advisable to always leave a base, only for hands and another for feed. When applying powders, use a “top” only for powder. -Always enamel thin layers and seal edges. -Before use de lamp, connect it to a regulator for greater durability. -Drying time in 30 sec for layer in led or uv / led lamps of 36 watts or more. Drying time of 2 min per layer for uv lamps of 36 watts. If your lamp has more voltage you can dry in less time. If your lamp has less voltage, please adjust the drying time to your lamp. NAIL PREPARATION When should I stop polishing the nail? 1. Rub gently with 180 grain sonpy lime to leave the porous nail, that is leave the nail without shine. BASE Why does not the base last? 1. Inadequate preparation. Check that the nail is well polished, do not leave it with shine or grease. 2. The less amount of base you occupy, the adhesion will be better. Remove the excess from the brush when glazing. We recommend starting with the tips and then with the rest of the nail. Check the videos section to apply the base. 3. Check that your lamp dries correctly. 4. Do not forget to seal the edges. Is it necessary to brush the base? It is not necessary, but it is ideal, because this way you verify that the base is dry and thin. Besides, it activates a better adhesion with the color. Why are there 2 bases? Differences between “base” and “rubber base” 1. Both are very good bases. The difference is that the normal base requires ph leveling and in warm areas, or when the client exposes the natural nail to the water, pools, use “punta secure”. It is a more liquid base and it is used on acrylic or natural nail. 2. The “rubber base” does not require nail prepares. It is applied on the porous and clean nail. It is less fluid and is ideal for clients who has thin fingernail or difficult ph. 3. The base is always applied in thin layers because it has more adhesion and it looks more natural, also the removal is faster. TOP Why does not the “top” shine? 1. Check the heat of the lamp and the drying time. 2. Apply thin layers. 3. Wait a few seconds when leaving the lamp so that the nail does not become opaque. Why does the “top” has granules? 1. Check that your work area is always clean to not contaminate the colors when you polish the nail. Close the enamels after finishing work. What does “top no wipe” mean? 1. “Top no wipe” is a top that when drying does not make an inhibition layer, is high brightness and it is used for any gel o acrylic application. MATTE Why is the “matte” not uniform? 1. Apply the “matte” with the “flotada” brush in sufficient quantity on the color gel without grease or powder. 2. Check your drying times. “Matte” gives velvet effect and need heat. If it is led/uv with high power, in 30 sec, but if it is not, with 60 sec. Conversely if the lamp is only led, dry 3 times for 30 sec. COLOR Why does the color shrink? 1. Enamel with a thin layer and dry it correctly. NATURAL BUILDER How can I protect the decals for durability? 1. Apply 2 thin layers, drying in 30 sec. The natural is very good nail hardener. You can apply 2 thin layers above the base before the color on applications of natural nail. 4D What should I do to make the powder application last longer? 1. Apply a 4D layer above the “top no wipe” and seal the tips well. If it is necessary, flip the hand, seal and dry it. Apply “top no wipe” again. You can also use “natural builder” to seal. POWDERS Why does not the powder shine? 1. Always apply the “top no wipe” above the powders. 2. Dry it correctly with an adequate lamp and enough time. 3. Dry finger by finger to give it more shine and so that the powder does not soak. 4. Rub the powder when leaving the lamp because the nail is still hot. 5. Check that your powder applicator is dry, clean and not contaminated. 6. Rub without scraping, gently. You can use a rubber applicator. why does not the application of powder last? 1. The powders are applied in acrylic nails because they do not have flexibility. 2. The powders must be encapsulated with natural (2 layers) or 4D (1 layer), seal the edges well and then apply “top” above. Dry well because they are many layers.
INFORMATION FAQ Contact
SOCIAL NETWORKS
CUSTOMER SERVICE PHONES Telephone number: +52 1 (271) 712 33 66 Cellphone number: +52 1 271 111 5829 (WhatsApp)
FAQ
RECOMMENDATIONS -Check that your work area is free of dusk. -Before working, disinfect your client’s hands and yours with your profantastik cleaner. -Advisable to always leave a base, only for hands and another for feed. When applying powders, use a “top” only for powder. -Always enamel thin layers and seal edges. -Before use de lamp, connect it to a regulator for greater durability. -Drying time in 30 sec for layer in led or uv / led lamps of 36 watts or more. Drying time of 2 min per layer for uv lamps of 36 watts. If your lamp has more voltage you can dry in less time. If your lamp has less voltage, please adjust the drying time to your lamp. NAIL PREPARATION When should I stop polishing the nail? 1. Rub gently with 180 grain sonpy lime to leave the porous nail, that is leave the nail without shine. BASE Why does not the base last? 1. Inadequate preparation. Check that the nail is well polished, do not leave it with shine or grease. 2. The less amount of base you occupy, the adhesion will be better. Remove the excess from the brush when glazing. We recommend starting with the tips and then with the rest of the nail. Check the videos section to apply the base. 3. Check that your lamp dries correctly. 4. Do not forget to seal the edges. Is it necessary to brush the base? It is not necessary, but it is ideal, because this way you verify that the base is dry and thin. Besides, it activates a better adhesion with the color. Why are there 2 bases? Differences between “base” and “rubber base” 1. Both are very good bases. The difference is that the normal base requires ph leveling and in warm areas, or when the client exposes the natural nail to the water, pools, use “punta secure”. It is a more liquid base and it is used on acrylic or natural nail. 2. The “rubber base” does not require nail prepares. It is applied on the porous and clean nail. It is less fluid and is ideal for clients who has thin fingernail or difficult ph. 3. The base is always applied in thin layers because it has more adhesion and it looks more natural, also the removal is faster. TOP Why does not the “top” shine? 1. Check the heat of the lamp and the drying time. 2. Apply thin layers. 3. Wait a few seconds when leaving the lamp so that the nail does not become opaque. Why does the “top” has granules? 1. Check that your work area is always clean to not contaminate the colors when you polish the nail. Close the enamels after finishing work. What does “top no wipe” mean? 1. “Top no wipe” is a top that when drying does not make an inhibition layer, is high brightness and it is used for any gel o acrylic application. MATTE Why is the “matte” not uniform? 1. Apply the “matte” with the “flotada” brush in sufficient quantity on the color gel without grease or powder. 2. Check your drying times. “Matte” gives velvet effect and need heat. If it is led/uv with high power, in 30 sec, but if it is not, with 60 sec. Conversely if the lamp is only led, dry 3 times for 30 sec. COLOR Why does the color shrink? 1. Enamel with a thin layer and dry it correctly. NATURAL BUILDER How can I protect the decals for durability? 1. Apply 2 thin layers, drying in 30 sec. The natural is very good nail hardener. You can apply 2 thin layers above the base before the color on applications of natural nail. 4D What should I do to make the powder application last longer? 1. Apply a 4D layer above the “top no wipe” and seal the tips well. If it is necessary, flip the hand, seal and dry it. Apply “top no wipe” again. You can also use “natural builder” to seal. POWDERS Why does not the powder shine? 1. Always apply the “top no wipe” above the powders. 2. Dry it correctly with an adequate lamp and enough time. 3. Dry finger by finger to give it more shine and so that the powder does not soak. 4. Rub the powder when leaving the lamp because the nail is still hot. 5. Check that your powder applicator is dry, clean and not contaminated. 6. Rub without scraping, gently. You can use a rubber applicator. why does not the application of powder last? 1. The powders are applied in acrylic nails because they do not have flexibility. 2. The powders must be encapsulated with natural (2 layers) or 4D (1 layer), seal the edges well and then apply “top” above. Dry well because they are many layers.
INFORMATION FAQ Contact
SOCIAL NETWORKS
CUSTOMER SERVICE PHONES Telephone number: +52 1 (271) 712 33 66 Cellphone number: +52 1 271 111 5829 (WhatsApp)
FAQ
RECOMMENDATIONS -Check that your work area is free of dusk. -Before working, disinfect your client’s hands and yours with your profantastik cleaner. -Advisable to always leave a base, only for hands and another for feed. When applying powders, use a “top” only for powder. -Always enamel thin layers and seal edges. -Before use de lamp, connect it to a regulator for greater durability. -Drying time in 30 sec for layer in led or uv / led lamps of 36 watts or more. Drying time of 2 min per layer for uv lamps of 36 watts. If your lamp has more voltage you can dry in less time. If your lamp has less voltage, please adjust the drying time to your lamp. NAIL PREPARATION When should I stop polishing the nail? 1. Rub gently with 180 grain sonpy lime to leave the porous nail, that is leave the nail without shine. BASE Why does not the base last? 1. Inadequate preparation. Check that the nail is well polished, do not leave it with shine or grease. 2. The less amount of base you occupy, the adhesion will be better. Remove the excess from the brush when glazing. We recommend starting with the tips and then with the rest of the nail. Check the videos section to apply the base. 3. Check that your lamp dries correctly. 4. Do not forget to seal the edges. Is it necessary to brush the base? It is not necessary, but it is ideal, because this way you verify that the base is dry and thin. Besides, it activates a better adhesion with the color. Why are there 2 bases? Differences between “base” and “rubber base” 1. Both are very good bases. The difference is that the normal base requires ph leveling and in warm areas, or when the client exposes the natural nail to the water, pools, use “punta secure”. It is a more liquid base and it is used on acrylic or natural nail. 2. The “rubber base” does not require nail prepares. It is applied on the porous and clean nail. It is less fluid and is ideal for clients who has thin fingernail or difficult ph. 3. The base is always applied in thin layers because it has more adhesion and it looks more natural, also the removal is faster. TOP Why does not the “top” shine? 1. Check the heat of the lamp and the drying time. 2. Apply thin layers. 3. Wait a few seconds when leaving the lamp so that the nail does not become opaque. Why does the “top” has granules? 1. Check that your work area is always clean to not contaminate the colors when you polish the nail. Close the enamels after finishing work. What does “top no wipe” mean? 1. “Top no wipe” is a top that when drying does not make an inhibition layer, is high brightness and it is used for any gel o acrylic application. MATTE Why is the “matte” not uniform? 1. Apply the “matte” with the “flotada” brush in sufficient quantity on the color gel without grease or powder. 2. Check your drying times. “Matte” gives velvet effect and need heat. If it is led/uv with high power, in 30 sec, but if it is not, with 60 sec. Conversely if the lamp is only led, dry 3 times for 30 sec. COLOR Why does the color shrink? 1. Enamel with a thin layer and dry it correctly. NATURAL BUILDER How can I protect the decals for durability? 1. Apply 2 thin layers, drying in 30 sec. The natural is very good nail hardener. You can apply 2 thin layers above the base before the color on applications of natural nail. 4D What should I do to make the powder application last longer? 1. Apply a 4D layer above the “top no wipe” and seal the tips well. If it is necessary, flip the hand, seal and dry it. Apply “top no wipe” again. You can also use “natural builder” to seal. POWDERS Why does not the powder shine? 1. Always apply the “top no wipe” above the powders. 2. Dry it correctly with an adequate lamp and enough time. 3. Dry finger by finger to give it more shine and so that the powder does not soak. 4. Rub the powder when leaving the lamp because the nail is still hot. 5. Check that your powder applicator is dry, clean and not contaminated. 6. Rub without scraping, gently. You can use a rubber applicator. why does not the application of powder last? 1. The powders are applied in acrylic nails because they do not have flexibility. 2. The powders must be encapsulated with natural (2 layers) or 4D (1 layer), seal the edges well and then apply “top” above. Dry well because they are many layers.
INFORMATION SOCIAL NETWORKS
FAQ
Contact Telephone number: +52 1 (271) 712 33 66 Cellphone number: +52 1 271 111 5829 (WhatsApp)
FAQ
RECOMMENDATIONS -Check that your work area is free of dusk. -Before working, disinfect your client’s hands and yours with your profantastik cleaner. -Advisable to always leave a base, only for hands and another for feed. When applying powders, use a “top” only for powder. -Always enamel thin layers and seal edges. -Before use de lamp, connect it to a regulator for greater durability. -Drying time in 30 sec for layer in led or uv / led lamps of 36 watts or more. Drying time of 2 min per layer for uv lamps of 36 watts. If your lamp has more voltage you can dry in less time. If your lamp has less voltage, please adjust the drying time to your lamp. NAIL PREPARATION When should I stop polishing the nail? 1. Rub gently with 180 grain sonpy lime to leave the porous nail, that is leave the nail without shine. BASE Why does not the base last? 1. Inadequate preparation. Check that the nail is well polished, do not leave it with shine or grease. 2. The less amount of base you occupy, the adhesion will be better. Remove the excess from the brush when glazing. We recommend starting with the tips and then with the rest of the nail. Check the videos section to apply the base. 3. Check that your lamp dries correctly. 4. Do not forget to seal the edges. Is it necessary to brush the base? It is not necessary, but it is ideal, because this way you verify that the base is dry and thin. Besides, it activates a better adhesion with the color. Why are there 2 bases? Differences between “base” and “rubber base” 1. Both are very good bases. The difference is that the normal base requires ph leveling and in warm areas, or when the client exposes the natural nail to the water, pools, use “punta secure”. It is a more liquid base and it is used on acrylic or natural nail. 2. The “rubber base” does not require nail prepares. It is applied on the porous and clean nail. It is less fluid and is ideal for clients who has thin fingernail or difficult ph. 3. The base is always applied in thin layers because it has more adhesion and it looks more natural, also the removal is faster. TOP Why does not the “top” shine? 1. Check the heat of the lamp and the drying time. 2. Apply thin layers. 3. Wait a few seconds when leaving the lamp so that the nail does not become opaque. Why does the “top” has granules? 1. Check that your work area is always clean to not contaminate the colors when you polish the nail. Close the enamels after finishing work. What does “top no wipe” mean? 1. “Top no wipe” is a top that when drying does not make an inhibition layer, is high brightness and it is used for any gel o acrylic application. MATTE Why is the “matte” not uniform? 1. Apply the “matte” with the “flotada” brush in sufficient quantity on the color gel without grease or powder. 2. Check your drying times. “Matte” gives velvet effect and need heat. If it is led/uv with high power, in 30 sec, but if it is not, with 60 sec. Conversely if the lamp is only led, dry 3 times for 30 sec. COLOR Why does the color shrink? 1. Enamel with a thin layer and dry it correctly. NATURAL BUILDER How can I protect the decals for durability? 1. Apply 2 thin layers, drying in 30 sec. The natural is very good nail hardener. You can apply 2 thin layers above the base before the color on applications of natural nail. 4D What should I do to make the powder application last longer? 1. Apply a 4D layer above the “top no wipe” and seal the tips well. If it is necessary, flip the hand, seal and dry it. Apply “top no wipe” again. You can also use “natural builder” to seal. POWDERS Why does not the powder shine? 1. Always apply the “top no wipe” above the powders. 2. Dry it correctly with an adequate lamp and enough time. 3. Dry finger by finger to give it more shine and so that the powder does not soak. 4. Rub the powder when leaving the lamp because the nail is still hot. 5. Check that your powder applicator is dry, clean and not contaminated. 6. Rub without scraping, gently. You can use a rubber applicator. why does not the application of powder last? 1. The powders are applied in acrylic nails because they do not have flexibility. 2. The powders must be encapsulated with natural (2 layers) or 4D (1 layer), seal the edges well and then apply “top” above. Dry well because they are many layers.
CUSTOMER SERVICE PHONES